| Basic functions |
| Line mode | OTN | 80 x ODU0<->ODU4<->OTU4 40 x ODU1<->ODU4<->OTU4 10 x ODU2<->ODU4<->OTU4 10 x ODU2e<->ODU4<->OTU4 ODU4<->OTU4 ODUflex(n=1, 80)<->ODU4<->OTU4 |
| SDH | 8 x STM-16<->8 x ODU1<->1 x ODU4<->1 x OTU4 2 x STM-64<->2 x ODU2<->1 x ODU4<->1 x OTU4 |
| Regeneration mode | - | 1 x OTU4<->1 x OTU4 |
| Clock synchronization | OTN services: Supported (ODU0/ODU1/ODU2/ODUflex) SDH services: SDH clock synchronization is supported when SDH virtual ports are configured. |
| IEEE 1588v2 | Not supported |
| Specifications (OTN functions) |
| Basic functions | Supports conversion of the following signals: 80 x ODU0/80 x ODUflex/40 x ODU1/10 x ODU2/10 x ODU2e/1 x ODU4<->1 x OTU4 Supports hybrid transmission of ODU0, ODU1, ODU2, ODU2e, and ODUflex signals. |
| Cross-connect functionality | Implements the following service grooming when working with cross-connect boards: 80 x ODU0/ODUflex, 40 x ODU1, 10 x ODU2/ODU2e, 1 x ODU4. |
| OTN function | Supports OTU4 interfaces on the WDM side. Adopts the frame formats and overhead processing methods defined in ITU-T G.709. Supports the SM function at the OTU4 layer. Supports the PM and TCM functions at the ODUk (k = 0, 1, 2, 2e, 3, 4, or flex) layer, and non-intrusive monitoring of PM and TCM overheads. |
| Performance and alarm monitoring | Monitors BIP8 bytes (burst mode) to help locate line failures. Monitors parameters such as the bias current, operating temperature, and optical power of a laser. Monitors OTN alarms and performance events. |
| Protection scheme | Supports ODUk SNCP. Supports intra-board 1+1 protection (when working with the OLP board). Supports tributary SNCP protection. NOTE: When the cross-connect granularity is ODUflex, the board does not support tributary SNCP protection. |
| Specifications (SDH functions) |
| Overhead processing | Processes section overheads of STM-16/STM-64 signals. Transparently transmits and terminates path overheads. Supports the setting and querying of J0 (to be received) bytes. Provides transparent DCCs and orderwire byte channels. |
| Protection schemes | Supports SNCP protection. Supports 1+1 linear MSP protection. |
| Service processing | Supports VC-12, VC-3, VC-4, VC-4-4c, VC-4-16c, and VC-4-64c services. (VC-4-4c, VC-4-16c, and VC-4-64c services are concatenated services.) |
| Loopback | Supports outloops on VC-12, VC-3 channels, and supports inloops/outloops on VC-4 channels. |
| Performance and alarm monitoring | Monitors B1 and B2 bytes to help locate line failures. |
| Version description of the UNS4 board |
| Board | Product Applicable-System Control Board-Initial Board Version Supported by System Control Board |
| TNZ5UNS4 | 1800 V-TNF5UXCM/TNF5UXCME/TNF5XCH-V100R006C20 |
| CFP-100G-(1529.17nm to 1567.1nm)(DWDM,Tunable, high optical power, T65)-SMF Specifications |
| Parameter | Value |
| Line code format | ePDM-QPSK(SDFEC2, wDCM-Metro) |
| Transmitter parameter specifications at point S |
| Center frequency (THz) | 191.3 to 196.05 |
| Maximum mean launched power (dBm) | 2 |
| Minimum mean launched power (dBm) | -3 |
| Center frequency deviation (GHz) | ±2.5 |
| Maximum -10 dB spectral width (nm) | 0.4 |
| Maximum -3 dB spectral width (nm) | 0.3 |
| Dispersion tolerance (back-to-back) (ps/nm) | 12000 |
| TX OSNR(in band) (dB) | 35 |
| Receiver parameter specifications at point R |
| Receiver type | PIN |
| Operating wavelength range (nm) | 1529 to 1568 |
| Receiver sensitivity (dBm) | -18 |
| Minimum receiver overload (dBm) | 0 |
| Maximum reflectance (dB) | 27 |
| Mechanical Specifications |
| Typical Power Consumption(W) | 91 (Line Mode) / 89.2 (Regeneration Mode) |
| Maximum Power Consumption(W) | 102.5 (Line Mode) / 98.4 (Regeneration Mode) |
| Dimension (W x H x D, mm) | 193.8 x 40.1 x 205.9 |
| Weight(kg) | 1.70 kg |
